Last Modified: Jan 27, 2021
MFG Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC | DAC |
MIL-R-26/1 |
B | 2 | 2 | E | |||
RW15V390 |
B | 1 | 4 | E |
Item Name: | RESISTOR,FIXED,WIRE WOUND,INDUCT |
Federal Supply Class (FSC): | 5905 |
NIIN: | 00-001-2826 (000012826) |
Definition: | Inc 37403 reinstated on 010303~a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. the item must have inherent characteristics of inducing self-inductance. opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. excludes suppressor, ignition interference. see also resistor (1), fixed, wire wound, noninductive. |
NMF Description: | REOSTATS/PARTS NOI |
Federal Supply Class (FSC) |
Resistors | |
Ambient Temp In Deg Celsius At Full Rated Power |
25.0 | AAQF |
Ambient Temp In Deg Celsius At Zero Percent Rated Power |
350.0 | AAQG |
Body Diameter |
0.438 inches minimum and 0.750 inches maximum | ABPM |
Body Length |
2.751 inches minimum and 3.124 inches maximum | ADAQ |
Electrical Resistance |
39.000 ohms | AAPP |
Inclosure Method |
Encapsulated | AAQZ |
Reliability Indicator |
Not established | AARG |
Resistance Tolerance In Percent |
-5.000 to 5.000 | AAPQ |
Power Dissipation Rating In Watts |
29.000 free air | AEFB |
Specification/standard Data |
81349-mil-r-26/1 government specification | ZZZK |
Style Designator |
Axial terminal each end | STYL |
Temp Range Of Temp Coefficient In Deg Celsius |
-55.0 to 350.0 | AAQH |
Temp Coefficient Of Resistance In Ppm Per Deg Celsius |
-260.0 to 260.0 | AAPE |
Terminal Length |
0.438 inches minimum and 0.562 inches maximum | ABJT |
Terminal Type |
Ferrule | AARB |
Test Data Document |
81349-mil-r-26 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). | TEST |
Schedule B | Sch. B Description | Demilitarization | Classification | ITAR Regulation |
---|---|---|---|---|
8533390080 | Wirewound variable resistors, nesoi | Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). | Unclassified | Not ITAR Controlled |
Country / Entity Name | MOE | |
---|---|---|
![]() |
United States | ZZ |
![]() |
Defense Logistics Agency | ZZ |
Code Description | Value | Meaning |
---|---|---|
HMIRS | N | Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
Precious Metals Indicator | U | Precious metal content is unknown |
Electrostatic Discharge | A | No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity. |
Criticality Code | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Code Description | Code | Value | Meaning |
---|---|---|---|
NMF Description | NMFC | 062960 | Reostats/parts Noi |
Less than a truck load rating | LTL | P | 77.5 |
Water Commodity | WCC | 72D | Communications/electronics, other than sigint/ew or comsec repair parts and components |
Type of Cargo | TCC | Z | No special type of cargo code applicable |
Special Handling | SHC | 9 | Other or no special handling required (sh) |
Air Dimension Code | ADC | A | Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
Air Commodity | ACC | H | Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
Air Special Handling | ASH | Array | No special handling required. |
5905-00-001-2826, Inc 37403 reinstated on 010303~a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. the item must have inherent characteristics of inducing self-inductance. opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. excludes suppressor, ignition interference. see also resistor (1), fixed, wire wound, noninductive.
Supply Class (FSC) | NSN Assignment | NIIN | Item Name Code (INC) |
---|---|---|---|
5905 | Sep 24, 1972 | 000012826 | 37403 (Resistor, Fixed, Wire Wound, Induct) |
RW15V390 | Cage Code 81349 |
MIL-R-26/1 | Cage Code 81349 |
COUNTRY CODE: | 00 |
CIIC: | U |
DML: | A |
HMIC: | N |
MGMT CTRL: | ------- |
SOS: | SMS |
INC: | 37403 |
AAC: | V |
CRITL CODE: | X |
DEMIL CODE: | A |
S A: | DS |
MGMT CTL: | 9B----- |
NIIN ASGMT: | 24-SEP-72 |
QUP: | 1 |
SLC: | 0 |
UI: | EA |
CAGE: | 81349 |
RNCC: | 2 |
RNVC: | 2 |
Cognizance | 9B – Naval inventory control point, mechanicsburg |
Special Material | |
Requisition Restriction | |
Special Material Content |
Cognizance (COG) | Identifies the inventory manager (IM) and inventory control point (ICP). |
Special Material (SMIC) | Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling |
Req. Restriction (IRRC) | Item requisition instructions. |
Special Material (SMCC) | Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management. |