Last Modified: Jan 23, 2021
MFG Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC | DAC |
RNR60E3010FS |
2 | 9 | 5 | 3 | |||
MILR55182-3 |
2 | 9 | 5 | 3 | |||
RNR60E3010FM |
2 | 9 | 5 | 3 | |||
RNR60E3010FP |
2 | 2 | 2 | 3 | |||
RNR60E3010FR |
2 | 1 | 4 | 3 |
Item Name: | RESISTOR,FIXED,FILM |
Federal Supply Class (FSC): | 5905 |
NIIN: | 00-001-2814 (000012814) |
Definition: | A resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. see also attenuator, fixed and resistor, fixed, composition. excludes carbon composition type resistors. |
NMF Description: | REOSTATS/PARTS NOI |
Federal Supply Class (FSC) |
Resistors | |
Electrical Resistance |
301.000 ohms | AAPP |
Ambient Temp In Deg Celsius At Full Rated Power |
125.0 | AAQF |
Ambient Temp In Deg Celsius At Zero Percent Rated Power |
175.0 | AAQG |
Body Diameter |
0.125 inches nominal | ABPM |
Body Length |
0.375 inches nominal | ADAQ |
Inclosure Method |
Hermetically sealed | AAQZ |
Reliability Failure Rate Level In Percent |
0.001 | AARH |
Reliability Indicator |
Established | AARG |
Resistance Tolerance In Percent |
-1.000 to 1.000 | AAPQ |
Power Dissipation Rating In Watts |
0.125 free air | AEFB |
Style Designator |
Axial terminal each end | STYL |
Temp Range Of Temp Coefficient In Deg Celsius |
-55.0/+175.0 | AAQH |
Temp Coefficient Of Resistance In Ppm Per Deg Celsius |
-25.0/+25.0 | AAPE |
Terminal Type |
Wire lead | AARB |
Test Data Document |
81349-milr55182 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). | TEST |
Schedule B | Sch. B Description | Demilitarization | Classification | ITAR Regulation |
---|---|---|---|---|
8533100042 | Fixed carbon resistors, composition or film type, designed for surface mounting, having two terminals | Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). | Unclassified | Not ITAR Controlled |
Country / Entity Name | MOE | |
---|---|---|
![]() |
Poland | WP |
![]() |
Turkey | ZW |
![]() |
United States | ZZ |
![]() |
Department Of The Air Force | ZZ |
Code Description | Value | Meaning |
---|---|---|
HMIRS | N | Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
Precious Metals Indicator | U | Precious metal content is unknown |
Electrostatic Discharge | B | Represents items with esd sensitivity. |
Criticality Code | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Code Description | Code | Value | Meaning |
---|---|---|---|
NMF Description | NMFC | 062960 | Reostats/parts Noi |
Less than a truck load rating | LTL | P | 77.5 |
Water Commodity | WCC | 72D | Communications/electronics, other than sigint/ew or comsec repair parts and components |
Type of Cargo | TCC | 3 | Electrostatic sensitive device (esd) |
Special Handling | SHC | 9 | Other or no special handling required (sh) |
Air Dimension Code | ADC | A | Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
Air Commodity | ACC | H | Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
Air Special Handling | ASH | Array | No special handling required. |
5905-00-001-2814, A resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. see also attenuator, fixed and resistor, fixed, composition. excludes carbon composition type resistors.
Supply Class (FSC) | NSN Assignment | NIIN | Item Name Code (INC) |
---|---|---|---|
5905 | Sep 22, 1972 | 000012814 | 05311 (Resistor, Fixed, Film) |
RNR60E3010FS | Cage Code 81349 |
MILR55182-3 | Cage Code 81349 |
RNR60E3010FM | Cage Code 81349 |
RNR60E3010FP | Cage Code 81349 |
RNR60E3010FR | Cage Code 81349 |
COUNTRY CODE: | 00 |
CIIC: | U |
DML: | A |
HMIC: | N |
MGMT CTRL: | SF9EH-V |
SOS: | SMS |
INC: | 5311 |
WEAPON SYSTEM: | AIRCRAFT, B-1B |
AAC: | Z |
CRITL CODE: | X |
DEMIL CODE: | A |
S A: | DS |
MGMT CTL: | ------- |
NIIN ASGMT: | 22-SEP-72 |
QUP: | 0 |
SLC: | 0 |
UI: | EA |
CAGE: | 81349 |
ESDC: | B |
RNCC: | 5 |
RNVC: | 9 |
Fund | SF – Stock fund applicable to items managed for the air force by the respective inventory control point. |
Budget | 9 – Air force decentrally managed |
Material Management | EH – Electronic components (engineering support at the 88th ose/oss) |
Price Validation | V – The current standard price has been validated. - the item has been analyzed in conjunction with the zero overpricing program and is in the accepted price range. -the item was procured under open competition and under the competitive arena the price is considered fair and reasonable. -zop or standard price challenges are permissible but must be supported by adequate justification. |
Fund | A two position code that classifies an item into categories in terms of funding and budgeting. |
Budget | Identifies investment items to budget programs from which item is funded. |
Material Management | Identifies an item of supply to be managed by a specific activity manager. |
Price Validation | Indicates validity of the recorded unit price. |
Cognizance | 9B – Naval inventory control point, mechanicsburg |
Special Material | |
Requisition Restriction | |
Special Material Content |
Cognizance (COG) | Identifies the inventory manager (IM) and inventory control point (ICP). |
Special Material (SMIC) | Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling |
Req. Restriction (IRRC) | Item requisition instructions. |
Special Material (SMCC) | Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management. |