Last Modified: Jul 02, 2020
NSN 5365-00-003-0590 Spacer, Ring
MFG Part Numbers: 332567
Cross Reference Parts for NSN 5365-00-003-0590
| MFG Part Number |
ISC |
RNVC |
RNCC |
HCC |
MSDS |
SADC |
DAC |
|
|
2 |
2 |
3 |
|
|
|
1 |
Part Information for NSN 5365-00-003-0590 (5365000030590)
| Item Name: |
SPACER,RING |
| Federal Supply Class (FSC): |
5365 |
| NIIN: |
00-003-0590 (000030590) |
| Definition: |
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve. |
| NMF Description: |
WASHER OR GASKETS, IRON OR STEEL, |
Item Specifics
Federal Supply Class (FSC) |
Bushings Rings Shims And Spacers
|
Hardness Rating |
38.0 rockwell c minimum and 48.0 rockwell c maximum |
CQFM
|
Material |
Steel |
MATT
|
Outside Diameter |
0.887 inches minimum and 0.897 inches maximum |
ABHE
|
Inside Diameter |
0.752 inches minimum and 0.762 inches maximum |
AARX
|
Overall Thickness |
0.070 inches minimum and 0.072 inches maximum |
ADUM
|
Surface Finish |
125.0 microinches overall |
CSYM
|
Trade Control Compliance
Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.
| Schedule B |
Sch. B Description |
Demilitarization |
Classification |
ITAR Regulation |
| 7326908595 |
Other articles of iron or steel not wire nesoi |
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). |
Unclassified |
Not ITAR Controlled |
MOE / End Users
Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.
|
Country / Entity Name |
MOE |
|
Department Of The Navy |
ZZ |
Material & Special Handling
Item material and handling information
| Code Description |
Value |
Meaning |
| HMIRS |
N |
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| Precious Metals Indicator |
A |
Item does not contain precious metal. |
| Criticality Code |
X |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
National Motor Freight
NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.
| Code Description |
Code |
Value |
Meaning |
| NMF Description |
NMFC |
194160 |
Washer Or Gaskets, Iron Or Steel, |
| Less than a truck load rating |
LTL |
U |
50.0 |
| Water Commodity |
WCC |
713 |
Metal hardware |
| Type of Cargo |
TCC |
Z |
No special type of cargo code applicable |
| Special Handling |
SHC |
9 |
Other or no special handling required (sh) |
| Air Dimension Code |
ADC |
A |
Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| Air Commodity |
ACC |
B |
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling |
ASH |
Array |
No special handling required. |
Item Identification
| Bushings, Rings, Shims, And Spacers
5365-00-003-0590, A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.
| Supply Class (FSC) | NSN Assignment | NIIN | Item Name Code (INC) |
|
5365 |
May 19, 1972 |
000030590 |
24307 (Spacer, Ring) |
Ring Spacers Cross Reference
Codes
| COUNTRY CODE: |
00 |
| CIIC: |
U |
| DML: |
A |
| HMIC: |
N |
| MGMT CTRL: |
------- |
| SOS: |
SMS |
| INC: |
24307 |
| WEAPON SYSTEM: |
AIRCRAFT, TOMCAT F-14 |
| AAC: |
Z |
| CRITL CODE: |
X |
| DEMIL CODE: |
A |
| S A: |
DS |
| MGMT CTL: |
9B----- |
| NIIN ASGMT: |
19-MAY-72 |
| QUP: |
1 |
| SLC: |
0 |
| UI: |
EA |
| CAGE: |
62983 |
| RNCC: |
3 |
| RNVC: |
2 |
Management
| Cognizance |
9B – Naval inventory control point, mechanicsburg |
| Special Material |
|
| Requisition Restriction |
|
| Special Material Content |
|
Navy Management Code Definition
| Cognizance (COG) |
Identifies the inventory manager (IM) and inventory control point (ICP). |
| Special Material (SMIC) |
Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling |
| Req. Restriction (IRRC) |
Item requisition instructions. |
| Special Material (SMCC) |
Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management. |
