A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
WASHER OR GASKETS, IRON OR STEEL,
Federal Supply Class (FSC)
Nuts And Washers
Center Hole Shape Style
Cross-sectional Shape Style
0.390 inches nominal
Material Document And Classification
Qq-s-766,cond a,fin 2b fed spec single material response overall
Steel comp 304 overall
0.687 inches nominal
Peripheral Shape Style
Surface Treatment Document And Classification
Mil-f-14072,finish e300 mil spec single treatment response overall
0.016 inches nominal
Trade Control Compliance
Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.
Sch. B Description
Washers other than lock washers, iron or steel
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9).
Not ITAR Controlled
MOE / End Users
Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.
Country / Entity Name
Korea, Republic Of
Department Of The Air Force
Material & Special Handling
Item material and handling information
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
National Motor Freight
NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.
Washer Or Gaskets, Iron Or Steel,
Less than a truck load rating
Type of Cargo
No special type of cargo code applicable
Other or no special handling required (sh)
Air Dimension Code
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling
No special handling required.
| Nuts And Washers
5310-00-001-4700, A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Supply Class (FSC)
Item Name Code (INC)
Sep 22, 1972
13393 (Washer, Flat)
Flat WashersCross Reference
Cage Code 80063
SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
9 – Air force decentrally managed
N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Management Code Definition
A two position code that classifies an item into categories in terms of funding and budgeting.
Identifies investment items to budget programs from which item is funded.
Identifies an item of supply to be managed by a specific activity manager.
Indicates validity of the recorded unit price.
9B – Naval inventory control point, mechanicsburg
Special Material Content
Navy Management Code Definition
Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC)
Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC)
Item requisition instructions.
Special Material (SMCC)
Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1
T – Industrial supplies (dla/gsa items)
Material Category 2
2 – Stock fund secondary items
Material Category 3
2 – Nonreparable items (exclusive of insurance and provisioning items). this code will be used to identify items which are not reparable.
Material Category 4 & 5
00 – Dla/gsa-managed items that cannot be identified to a specific army weapons systems/end item
Army Management Code Definition
Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.