Last Modified: Feb 25, 2021
NSN 3120-00-050-7539 Bushing, Sleeve
MFG Part Numbers: 369A1213, 369A1213
Cross Reference Parts for NSN 3120-00-050-7539
| MFG Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC | DAC |
369A1213 |
2 | 2 | 3 | 1 | |||
369A1213 |
2 | 9 | 5 | 1 |
Request A Quote
Part Information for NSN 3120-00-050-7539 (3120000507539)
| Item Name: | BUSHING,SLEEVE |
| Federal Supply Class (FSC): | 3120 |
| NIIN: | 00-050-7539 (000507539) |
| Definition: | A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig. |
| NMF Description: | BEARING/BUSHING O/T BALL/ROLLER I/S |
Item Specifics
Federal Supply Class (FSC) |
Bearings Plain Unmounted | |
Body Inside Diameter |
0.7504 inches minimum and 0.7512 inches maximum | ADAS |
Body Outside Diameter |
1.0015 inches minimum and 1.0025 inches maximum | ADAR |
Corner Shape |
Chamfered inside left corner | BZLX |
Corner Shape |
Square outside right corner | BZLX |
Hardness Rating |
56.0 rockwell c minimum overall and 58.0 rockwell c maximum overall | CQFM |
Material Document And Classification |
Qq-s-763 fed spec single material response overall | MDCL |
Material |
Steel comp 440c overall | MATT |
Overall Length |
0.3700 inches minimum and 0.3800 inches maximum | ABHP |
Style Designator |
Solid, plain, no outside flanges | STYL |
Surface Finish |
125.0 microinches intermediate layer | CSYM |
Test Data Document |
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). | TEST |
Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.
| Schedule B | Sch. B Description | Demilitarization | Classification | ITAR Regulation |
|---|---|---|---|---|
| 8482997060 | Parts, nesoi, for cylindrical roller bearings, nesoi | Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). | Unclassified | Not ITAR Controlled |
MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.
| Country / Entity Name | MOE | |
|---|---|---|
 |
Department Of The Army | ZZ |
Material & Special Handling Item material and handling information
| Code Description | Value | Meaning |
|---|---|---|
| HMIRS | N | Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| Precious Metals Indicator | U | Precious metal content is unknown |
| Criticality Code | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Repairability | A | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate man |
National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.
| Code Description | Code | Value | Meaning |
|---|---|---|---|
| NMF Description | NMFC | 114850 | Bearing/bushing O/t Ball/roller I/s |
| Less than a truck load rating | LTL | Q | 70.0 |
| Less than a car load rating | LCL | R | 65.0 |
| Water Commodity | WCC | 742 | Bearings |
| Type of Cargo | TCC | Z | No special type of cargo code applicable |
| Special Handling | SHC | 9 | Other or no special handling required (sh) |
| Air Dimension Code | ADC | A | Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| Air Commodity | ACC | V | Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing and special purpose vehicles, trailers, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | ASH | Array | No special handling required. |
Item Identification | Bearings, Plain, Unmounted
3120-00-050-7539, A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.
| Supply Class (FSC) | NSN Assignment | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 3120 | Dec 04, 1967 | 000507539 | 13206 (Bushing, Sleeve) |
Sleeve Bushings Cross Reference
| 369A1213 | Cage Code 8V613 |
| 369A1213 | Cage Code 02731 |
Codes
| COUNTRY CODE: | 00 |
| CIIC: | U |
| DML: | A |
| HMIC: | N |
| MGMT CTRL: | T2200X- |
| SOS: | SMS |
| INC: | 13206 |
| AAC: | V |
| CRITL CODE: | X |
| DEMIL CODE: | A |
| S A: | DA |
| MGMT CTL: | T2200X- |
| NIIN ASGMT: | 04-DEC-67 |
| QUP: | 1 |
| SLC: | 0 |
| UI: | EA |
| CAGE: | 8V613 |
| RNCC: | 3 |
| RNVC: | 2 |
Management
Army
| Accounting Requirements | X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items. |
| Material Category 1 | T – Industrial supplies (dla/gsa items) |
| Material Category 2 | 2 – Stock fund secondary items |
| Material Category 3 | 2 – Nonreparable items (exclusive of insurance and provisioning items). this code will be used to identify items which are not reparable. |
| Material Category 4 & 5 | 00 – Dla/gsa-managed items that cannot be identified to a specific army weapons systems/end item |
Army Management Code Definition
| Accounting Requirements | Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply. |
| Material Category 1 | Material category and inventory manager. |
| Material Category 2 | Appropriation and budget activity account. |
| Material Category 3 | Management inventory segment. |
| Material Category 4 & 5 | Specific group / generic category. |
