Last Modified: Mar 29, 2020
NSN 3040-00-003-1400 Shaft, Straight
MFG Part Numbers: 92367, 92367
Cross Reference Parts for NSN 3040-00-003-1400
| MFG Part Number |
ISC |
RNVC |
RNCC |
HCC |
MSDS |
SADC |
DAC |
|
|
C |
9 |
5 |
|
|
|
5 |
|
|
C |
2 |
3 |
|
|
|
5 |
Part Information for NSN 3040-00-003-1400 (3040000031400)
| Item Name: |
SHAFT,STRAIGHT |
| Federal Supply Class (FSC): |
3040 |
| NIIN: |
00-003-1400 (000031400) |
| Definition: |
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage. |
| NMF Description: |
-- |
Item Specifics
Federal Supply Class (FSC) |
Miscellaneous Power Transmission Equipment
|
First End Diameter |
0.2500 inches nominal |
AMDL
|
Material |
Steel |
MATT
|
Overall Length |
3.000 inches nominal |
ABHP
|
Trade Control Compliance
Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.
| Schedule B |
Sch. B Description |
Demilitarization |
Classification |
ITAR Regulation |
| 8483105000 |
Transmission shafts and cranks, except camshafts and crankshafts |
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). |
Unclassified |
Not ITAR Controlled |
MOE / End Users
Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.
|
Country / Entity Name |
MOE |
|
Defense Logistics Agency |
ZZ |
Material & Special Handling
Item material and handling information
| Code Description |
Value |
Meaning |
| HMIRS |
N |
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| Precious Metals Indicator |
U |
Precious metal content is unknown |
| Criticality Code |
X |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
National Motor Freight
NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.
| Code Description |
Code |
Value |
Meaning |
| NMF Description |
NMFC |
126900 |
Power Trans Shafting/shafts |
| Less than a truck load rating |
LTL |
W |
Rating variable |
| Water Commodity |
WCC |
593 |
Motors and parts, (machinery and parts),(less than 35 feet) |
| Type of Cargo |
TCC |
Z |
No special type of cargo code applicable |
| Special Handling |
SHC |
9 |
Other or no special handling required (sh) |
| Air Dimension Code |
ADC |
A |
Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| Air Commodity |
ACC |
V |
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing and special purpose vehicles, trailers, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling |
ASH |
Array |
No special handling required. |
Item Identification
| Miscellaneous Power Transmission Equipment
3040-00-003-1400, A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
| Supply Class (FSC) | NSN Assignment | NIIN | Item Name Code (INC) |
|
3040 |
May 21, 1972 |
000031400 |
22109 (Shaft, Straight) |
Straight Shafts Cross Reference
|
92367
|
Cage Code 57712 |
|
92367 |
Cage Code 64959 |
Codes
| COUNTRY CODE: |
00 |
| CIIC: |
U |
| DML: |
A |
| HMIC: |
N |
| MGMT CTRL: |
------- |
| SOS: |
SMS |
| INC: |
22109 |
| AAC: |
L |
| CRITL CODE: |
X |
| DEMIL CODE: |
A |
| S A: |
DS |
| MGMT CTL: |
------- |
| NIIN ASGMT: |
21-MAY-72 |
| QUP: |
0 |
| SLC: |
0 |
| UI: |
EA |
| CAGE: |
64959 |
| RNCC: |
5 |
| RNVC: |
9 |
Management
| Cognizance |
9B – Naval inventory control point, mechanicsburg |
| Special Material |
|
| Requisition Restriction |
|
| Special Material Content |
|
Navy Management Code Definition
| Cognizance (COG) |
Identifies the inventory manager (IM) and inventory control point (ICP). |
| Special Material (SMIC) |
Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling |
| Req. Restriction (IRRC) |
Item requisition instructions. |
| Special Material (SMCC) |
Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management. |
