A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
POWER TRANS SHAFTING/SHAFTS
Federal Supply Class (FSC)
Miscellaneous Power Transmission Equipment
Trade Control Compliance
Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.
Sch. B Description
Transmission shafts and cranks, except camshafts and crankshafts
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9).
Not ITAR Controlled
MOE / End Users
Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.
Country / Entity Name
Department Of The Navy
Material & Special Handling
Item material and handling information
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator
Precious metal content is unknown
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
National Motor Freight
NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.
Power Trans Shafting/shafts
Less than a truck load rating
Generators and parts, (machinery and parts),(less than 35 feet)
Type of Cargo
No special type of cargo code applicable
Other or no special handling required (sh)
Air Dimension Code
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling
No special handling required.
| Miscellaneous Power Transmission Equipment
3040-00-003-1003, A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
Supply Class (FSC)
Item Name Code (INC)
May 21, 1972
22914 (Shaft, Shouldered)
Shouldered ShaftsCross Reference
Cage Code 3B150
Cage Code 49956
LP – Items initially authorized for local purchase.
9 – Air force decentrally managed
TG – Brac mmac for wr-alc
N – The current standard price in the catalog management data (cmd) has not been analyzed or coded for lp/lm. -the price has not been analyzed or reviewed for accuracy. -zop or standard price challenges are permissible, but must be supported with adequate justification. however, if coded for local purchase (lp) or fabrication/manufacture as indicated with an (lm) acquisition advice code of l" or "f", the case must be evaluated locally where purchased or fabricated."
Air Force Management Code Definition
A two position code that classifies an item into categories in terms of funding and budgeting.
Identifies investment items to budget programs from which item is funded.
Identifies an item of supply to be managed by a specific activity manager.
Indicates validity of the recorded unit price.
9B – Naval inventory control point, mechanicsburg
Special Material Content
Navy Management Code Definition
Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC)
Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC)
Item requisition instructions.
Special Material (SMCC)
Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.
X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1
J – Ground forces support materiel (dla/gsa items)
Material Category 2
2 – Stock fund secondary items
Material Category 3
1 – Reparable items (exclusive of insurance and provisioning items.) this code will be used to identify serviceable or unserviceable items of a durable nature which when unserviceable normally can be repaired economically by depots or lower echelons of maint
Material Category 4 & 5
00 – Dla/gsa-managed items that cannot be identified to a specific army weapons systems/end item
Army Management Code Definition
Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.